Wireguard install Ubuntu 22.04

How can we help?

Навигация

Установка:

git clone https://github.com/pprometey/wireguard_aws.git wireguard_aws
cd wireguard_aws
sudo ./install.sh    # установит сервер
sudo ./initial.sh    # установит сервер и одного клиента
sudo ./remove.sh     # удалит сервер

Добавить клиента на сервер:

sudo ./add-client.sh
#OR
sudo ./add-client.sh $CLIENT_NAME # создаст клиента с заданным именем
sudo ./reset.sh # удалит всех клиентов с сервера


После установки не забыть открыть порт:

sudo ufw allow 54321

Содержимое скриптов:

initial.sh:

#!/bin/bash

echo "# Installing Wireguard"

./remove.sh

./install.sh

./add-client.sh

echo "# Wireguard installed"

install.sh:

#!/bin/bash

apt install software-properties-common -y
add-apt-repository ppa:wireguard/wireguard -y
apt update
apt install wireguard-dkms wireguard-tools qrencode -y


NET_FORWARD="net.ipv4.ip_forward=1"
sysctl -w  ${NET_FORWARD}
sed -i "s:#${NET_FORWARD}:${NET_FORWARD}:" /etc/sysctl.conf

cd /etc/wireguard

umask 077

SERVER_PRIVKEY=$( wg genkey )
SERVER_PUBKEY=$( echo $SERVER_PRIVKEY | wg pubkey )

echo $SERVER_PUBKEY > ./server_public.key
echo $SERVER_PRIVKEY > ./server_private.key

read -p "Enter the endpoint (external ip and port) in format [ipv4:port] (e.g. 4.3.2.1:54321):" ENDPOINT
if [ -z $ENDPOINT ]
then
echo "[#]Empty endpoint. Exit"
exit 1;
fi
echo $ENDPOINT > ./endpoint.var

if [ -z "$1" ]
  then 
    read -p "Enter the server address in the VPN subnet (CIDR format), [ENTER] set to default: 10.50.0.1: " SERVER_IP
    if [ -z $SERVER_IP ]
      then SERVER_IP="10.50.0.1"
    fi
  else SERVER_IP=$1
fi

echo $SERVER_IP | grep -o -E '([0-9]+\.){3}' > ./vpn_subnet.var

read -p "Enter the ip address of the server DNS (CIDR format), [ENTER] set to default: 1.1.1.1): " DNS
if [ -z $DNS ]
then DNS="1.1.1.1"
fi
echo $DNS > ./dns.var

echo 1 > ./last_used_ip.var

read -p "Enter the name of the WAN network interface ([ENTER] set to default: eth0): " WAN_INTERFACE_NAME
if [ -z $WAN_INTERFACE_NAME ]
then
  WAN_INTERFACE_NAME="eth0"
fi

echo $WAN_INTERFACE_NAME > ./wan_interface_name.var

cat ./endpoint.var | sed -e "s/:/ /" | while read SERVER_EXTERNAL_IP SERVER_EXTERNAL_PORT
do
cat > ./wg0.conf.def << EOF
[Interface]
Address = $SERVER_IP
SaveConfig = false
PrivateKey = $SERVER_PRIVKEY
ListenPort = $SERVER_EXTERNAL_PORT
PostUp   = iptables -A FORWARD -i %i -j ACCEPT; iptables -A FORWARD -o %i -j ACCEPT; iptables -t nat -A POSTROUTING -o $WAN_INTERFACE_NAME -j MASQUERADE;
PostDown = iptables -D FORWARD -i %i -j ACCEPT; iptables -D FORWARD -o %i -j ACCEPT; iptables -t nat -D POSTROUTING -o $WAN_INTERFACE_NAME -j MASQUERADE;
EOF
done

cp -f ./wg0.conf.def ./wg0.conf

systemctl enable wg-quick@wg0

add-client.sh:

#!/bin/bash

# We read from the input parameter the name of the client
if [ -z "$1" ]
  then 
    read -p "Enter VPN user name: " USERNAME
    if [ -z $USERNAME ]
      then
      echo "[#]Empty VPN user name. Exit"
      exit 1;
    fi
  else USERNAME=$1
fi

cd /etc/wireguard/

read DNS < ./dns.var
read ENDPOINT < ./endpoint.var
read VPN_SUBNET < ./vpn_subnet.var
PRESHARED_KEY="_preshared.key"
PRIV_KEY="_private.key"
PUB_KEY="_public.key"
ALLOWED_IP="0.0.0.0/0, ::/0"

# Go to the wireguard directory and create a directory structure in which we will store client configuration files
mkdir -p ./clients
cd ./clients
mkdir ./$USERNAME
cd ./$USERNAME
umask 077

CLIENT_PRESHARED_KEY=$( wg genpsk )
CLIENT_PRIVKEY=$( wg genkey )
CLIENT_PUBLIC_KEY=$( echo $CLIENT_PRIVKEY | wg pubkey )

#echo $CLIENT_PRESHARED_KEY > ./"$USERNAME$PRESHARED_KEY"
#echo $CLIENT_PRIVKEY > ./"$USERNAME$PRIV_KEY"
#echo $CLIENT_PUBLIC_KEY > ./"$USERNAME$PUB_KEY"

read SERVER_PUBLIC_KEY < /etc/wireguard/server_public.key

# We get the following client IP address
read OCTET_IP < /etc/wireguard/last_used_ip.var
OCTET_IP=$(($OCTET_IP+1))
echo $OCTET_IP > /etc/wireguard/last_used_ip.var

CLIENT_IP="$VPN_SUBNET$OCTET_IP/32"

# Create a blank configuration file client 
cat > /etc/wireguard/clients/$USERNAME/$USERNAME.conf << EOF
[Interface]
PrivateKey = $CLIENT_PRIVKEY
Address = $CLIENT_IP
DNS = $DNS
[Peer]
PublicKey = $SERVER_PUBLIC_KEY
PresharedKey = $CLIENT_PRESHARED_KEY
AllowedIPs = $ALLOWED_IP
Endpoint = $ENDPOINT
PersistentKeepalive=25
EOF

# Add new client data to the Wireguard configuration file
cat >> /etc/wireguard/wg0.conf << EOF
[Peer]
PublicKey = $CLIENT_PUBLIC_KEY
PresharedKey = $CLIENT_PRESHARED_KEY
AllowedIPs = $CLIENT_IP
EOF

# Restart Wireguard
systemctl stop wg-quick@wg0
systemctl start wg-quick@wg0

# Show QR config to display
qrencode -t ansiutf8 < ./$USERNAME.conf

# Show config file
echo "# Display $USERNAME.conf"
cat ./$USERNAME.conf

# Save QR config to png file
#qrencode -t png -o ./$USERNAME.png < ./$USERNAME.conf

remove.sh:

echo "# Removing"

wg-quick down wg0
systemctl stop wg-quick@wg0
systemctl disable wg-quick@wg0

yes | apt autoremove wireguard wireguard-dkms wireguard-tools
#yes | apt autoremove software-properties-common
yes | apt update

rm -rf /etc/wireguard

echo "# Removed"

reset.sh:

echo "# Reseting..."

cd /etc/wireguard

# Delete the folder with customer data
rm -rf ./clients

# Zero IP counter
echo "1" > last_used_ip.var

# Resetting the server configuration template to default settings
cp -f wg0.conf.def wg0.conf

systemctl stop wg-quick@wg0
wg-quick down wg0

echo "# Reseted"